Skip to main content
Skip table of contents

Consulting the consumption details

Consulting the readings

1. Touch one of the buttons to light up the display. When not in use, the display is dimmed to reduce energy consumption. The following start screen will appear.
Below left 

 indicates that you can read the electricity consumption on this screen.
On the top line, the electricity consumption will appear in W or kW.
During the fitting and programming of the installation, the installer will have determined which consumption circuit is shown here.
On the bottom line, the weekly consumption over the last seven days is shown in euros.

2. Press the middle button to scroll through the various readings. The number of screens that you can consult depends on the number of readings that the installation performs.

The screen with 

 shows the yield of the solar panels in kW and the weekly yield in euros.

The screen with 

 shows the gas consumption in m³/day and the weekly consumption in euros.

The screen with 

 shows the water consumption in m³/day and the weekly consumption in euros.

The installer will determine the language and the currency during the programming of the installation. You cannot adjust this setting here.



Consulting and correcting rates


1. Touch one of the buttons to light up the display, if necessary. The start screen will appear.

2. Keep the middle button pressed down until the settings menu opens. The following screen will appear.

3. Press the middle button to confirm RATES. You will come to a screen where you can choose between ELEKTRICITY, GAS or WATER.

4. Press on the top or bottom button to scroll through the list, and confirm your choice with the middle button. The selected rate will appear.

5. If necessary, correct the rate as follows:

    1. Choose the average value if multiple rates are applicable (day/night rate or variable rate);
    2. Press the top or bottom button to increase or reduce the value respectively. Holding down the button increases or reduces the value in larger increments;
    3. Press the middle button to confirm the modified value. You will automatically go back to the previous screen;
    4. Select < back with the top button, and confirm your choice with the middle button.

You will go back to the settings menu.

Viewing date and time

The date and time of the Niko Home Control installation are centrally controlled. You can modify the data in the user software. You can view the date and time as follows:


1. Touch one of the buttons to light up the display, if necessary. The start screen will appear.

2. Keep the middle button pressed down until the settings menu opens. The following screen will appear.

3. Press the bottom button to select DATE.

4. Press the middle button to confirm your choice. You will now see the following screen with the time, day, month and year.

5. Press on the top button to select < back, and confirm your choice with the middle button. You will go back to the settings menu.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.