Aldes and Niko Home Control

For an installation with version 2.16 or earlier, the link between Niko Home Control and Aldes can be activated and deactivated on mynikohomecontrol.niko.eu.

What can you do with Niko Home Control?

By using Niko Home Control with your Aldes system, you can do the following:

	Centralised mechanical exhaust ventilation (EasyHOME PureAIR Compact Connect and EasyHOME PureAIR Compact Premium)	Heat recovery ventilation (InspirAIR^® Side and InspirAIR^® Top)	Hot water heat pump (T.Flow^® Hygro+ and T.Flow^® Nano)	Heat pump (T.One^® AIR and T.One^® AquaAIR)
Check and control the fan ventilation speed (e.g. daily, boost, guests, holiday)
Check and control the ventilation mode (auto, program, manual)
Monitor the CO₂ level
Monitor the Relative Humidity level
Control and monitor the hot water mode (auto, boost, guests, holiday)
Check the current room temperature
Check and control the requested room temperature
Choose the program mode (e.g. off, eco, comfort, boost, prog)
Check and select the operation routine (e.g. heat, cool, off)
Boost and turn the hot water system on or off				(*)

(*) only for T.One^® AquaAIR.

The Aldes functions automatically appear in your Niko Home Control apps and your touchscreens after you activate the link between both systems. These functions can also be combined in routines/actions to control multiple items simultaneously at the simple press of a button (e.g. turn off all the lights and set the ventilation of heating in away mode when pressing the leaving the house button).

The available functionality within Niko Home Control depends upon the specific installation features of the Aldes system.
You can always use the AldesConnect^® app for more advanced settings and configurations.

What do you need?

In short

Extra information

General

No additional electrical wiring is required.
You have a computer with a web browser and an internet connection to set up the link between both systems.

Your Niko Home Control installation meets the following requirements:

It has a wireless smart hub or a connected controller II.
It is configured with the most recent programming software (version 2.17 or higher).
It has an active internet connection.
It is registered.
If you want to use the Aldes functions in combination with Niko Home Control actions, these actions need to be programmed with the Niko Home Control programming software after the link has been activated.

If you have not registered your Niko Home Control installation, go to Register your installation.

Your Aldes system meets the following requirements:

It is one the following comfort systems:
- Centralised mechanical exhaust ventilation system: EasyHOME PureAIR Compact Connect or EasyHOME PureAIR Compact Premium
- Heat recovery ventilation system: InspirAIR^® Side or InspirAIR^® Top
- Hot water heat pump: T.Flow^® Hygro+ or T.Flow^® Nano
- Heat pump: T.One^® AIR or T.One^® AquaAIR
It is equipped with an AldesConnect™ box.
It has an active internet connection.
You have your Aldes user account and password on hand.

How do you activate the link between your Niko Home Control and your Aldes system?

You have to set up the connection and functionality via the Niko Home Control programming software. Ask your professional installer for help.

How do you deactivate the link between your Niko Home Control and your Aldes system?

You deactivate the link with the Niko Home Control programming software. Ask your professional installer for help.

After deactivating the link, the following happens:

The Aldes functions disappear from your Niko Home Control apps, your touchscreens and Digital blacks.
When used in Niko Home Control actions, the Aldes functions will not be executed anymore.

How do you update the Niko Home Control basic actions and routines that use your Aldes system?

You update the basic actions and routines with the Niko Home Control programming software.