Description
The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling.
This allows wireless controls to be installed:
- on surfaces unsuited to cabling (e.g. glass or concrete partitions)
- for the renovation of heritage-listed buildings
- for expansions of existing installations where drilling or channelling work is not permitted
- in office areas with movable partition walls
- when complex cabling is to be avoided.
The interface is shaped like a USB stick and can be connected to the extension cable (3 m) provided, with the connected controller in the electrical cabinet. The end of the extension cable is fitted with an assembly ring allowing the antenna to be attached to the outside of the electrical cabinet for optimal reception.
OVERVIEW
410-00099
Technical data
DIMENSIONS IN MM
|
| 410-00099 |
SPECIFICATIONS
Specification | Value |
|---|---|
| Article number | 410-00099 |
| Power supply | USB-port |
| Communication protocol | Easywave – 868.3 MHz |
| Modulation | Frequency-Shift Keying (FSK) |
| Dimensions (HxWxD) | 68.7 x 24 x 7,2 mm |
| Length of the USB adapter cable | 3 m |
| Weight | 13 g |
| Ambient temperature | 0 - 40 °C |
| Colour of the USB antenna | white |
| Colour of the USB adapter cable | black |
| Maximum range | open field: up to 100 m buildings: up to 30 m |
Maximum radio frequency power of | 5,58 dBM |
| Modification of settings | Niko Home Control programming software |
| Maximum per installation | 1 |
| Marking | CE |