Page tree
Skip to end of metadata
Go to start of metadata

Starting point

Steps

The uploading of an installation takes place in several steps. 

Step

DescriptionPossible resultAction
1

Validate

Check the configuration.

The configuration is incomplete.

To ignore the warning: click on Continue.

To remove the warning: solve the problem in the Create, Fill cabinet or Address menu.
Validation is OK.Automatically on to step 2.

 2

 
 Connect Check the connection between the connected controller and the computer. There is no connection.Check whether the connected controller and the computer are connected correctly and click on Retry.
There is a connection.Automatically on to step 3.
3Check for upgradesCheck the firmware of the connected Niko Home Control installation for upgrades.

More recent firmware is available.

Automatically on to step 4.

No more recent firmware is available.Automatically on to step 5.
4UpgradeShow more recent firmware versions and estimated time.N/A

Click on Upgrade at the bottom to upgrade the installation.
During the upgrade you can follow the progress here.

Screenshot

5UploadUpload the configuration to the installation.N/A

Click on Upload to start uploading.
During the upload process you can follow the progress here.

Under Add version info, you can add free information, for instance the changes you have made to the configuration.

Screenshot

6Upload completedShow possible warnings.

Examples:

  • The configuration contains components which have not been found in the installation.
  • After phase 1 you continued without entering all addresses of all modules.

Analyse the problem and look for a solution.

Examples:

  • Add the missing components to your installation.
  • Correct the errors detected during the validation phase.


  • No labels