Measuring modules
You can install measuring modules for:
- electricity
- gas
- water
These measuring modules measure the consumption and/or yield for the different channels (max. 20).
You can display the measurement data and compare different periods.
To use this functionality on the touchscreen or in the app, the installation must be connected to the Internet. The measurement data are saved in the cloud.
Internet access is not required for the eco-display.
Types of measurements
The following settings can be selected per channel:
• for electricity: global, sub-reading consumption, sub-reading yield
• for water or gas: global or sub-reading consumption
Setting the rates
The graphs show the consumption or yield in m3 or kWh. Where relevant an amount in euros is shown.
Fill in the 3 conversion factors below in the Dashboard to display the average consumption in euros:
- average €/m for electricity
- average €/m3for gas
- average €/m3for water
Energy on the touchscreen
On the touchscreen the measurement data can be:
- displayed (live/per week/per month/per year)
- compared for different periods
On the touchscreen you can display the total consumption in euros.
Energy in the app
In the app the measurement data can be:
- displayed (live/per week/per month/per year)
- compared for different periods
In the app you cannot display the total consumption in euros.
Energy on the eco-display
On the eco-display you can display the measurement data (live/total for the last 7 days).
You can display up to 10 channels. To do so, use the advanced action Energy monitoring with eco-display in the programming software.
You can display the total consumption in euros, but then you need to enter the 3 conversion factors on each eco-display.