Page tree
Skip to end of metadata
Go to start of metadata

Description

Push buttons for motor control are available as single motor control (three action buttons) or double motor control (2 x three action buttons). They allow the resident to operate the motors of one or two groups of roll-down shutters, sun blinds or venetian blinds integrated in the Niko Home Control installation.

Overview


Operation

The specific action buttons on each push button are arranged in groups of three. Each group consists of the following buttons: "A", "B" and "C".

Action buttons with status LED will indicate in which rotation direction the end has or hasn´t been reached. The LEDS can be programmed so that they light up when the end has or hasn´t been reached. This can be determined in the programming software.

The table below provides an overview of all action button functions.

‘Before’ status

Action

‘After’ status

No motion

Briefly press "A" (< 0.4 s)

Fully open / upward motion

No motion

Briefly press "B" (< 0.4 s)

Preference setting (standard 50%)

No motion

Briefly press "C" (< 0.4 s)

Fully closed / downward motion

No motion

Hold down  "A" (≥ 0.4 s)

Opens / upward motion until the button is released.

No motion

Hold down "B" (> 3 s)

The current position is now saved as the new preference setting.

No motion

Hold down "C" (≥ 0.4 s)

Closes / downward motion until the button is released.

In motion

Briefly press "A" (< 0.4 s)

Stops

In motion

Briefly press "B" (< 0.4 s)

Stops

In motion

Briefly press "C" (< 0.4 s)

Stops

In motion

Hold down  "A" (≥ 0.4 s)

Stops

In motion

Hold down "B" (≥ 0.4 s)

Stops

In motion

Hold down "C" (≥ 0.4 s)

Stops

Installation

See Installation in Generic push buttons

Technical data

  • working voltage: 26 Vdc (SELV, safety extra-low voltage)
  • ambient temperature: 0 - 50°C
  • No labels